Products

Product Description

Single Cell Micromanipulator Set contains Coarse Manipulator, Three-axis Oil Hydraulic Micromanipulator and Pneumatic Microinjector for single cell micromanipulation.

Amenable Platform

CytoQuest™ CR positive enrichment cell isolation

LiquidCell™ negative enrichment cell isolation

Supplied Product

Set content:
Coarse Manipulator
Three-axis Oil Hydraulic Micromanipulator
Pneumatic Microinjector

Regulatory Status

For research use only (RUO)

Storage Instruction

Store at room temperature.

Note

This product should be used in combination with microscope as illustrated.

Setup

A. Coarse Manipulator
B. Three-axis Oil Hydraulic Micromanipulator
C. Pneumatic Microinjector

Coarse Manipulator

Coarse Manipulator is used in combination with a hydraulic micromanipulator to transfer the pipette into the microscope field of view. Since its operation is manual, this model offers excellent response. Setup and installation are straightforward. Return and rotating mechanisms are included for easy specimen or pipette exchange.


Specification:

Accessory included:
Hex Wrench

Movement range/Coarse:
X30mm, Y30mm, Z30mm

Dimensions/Weight:
W125 × D110 × H135mm, 600g

Three-axis Oil Hydraulic Micromanipulator

Three-axis Oil Hydraulic Micromanipulator’s hydraulic drive system can be remotely controlled, and provides smooth, vibration-free movements. As successor to the vernier type, it features a big cylinder control unit which enables very fine operation. Another key feature is high reproduction of the linear position. Compared with the currently popular joystick method, this control unit has a long record of use among discerning customers because of its simple design and outstanding cost-efficiency. For microinjection systems, this model is recommended for use on the cell holding side, in combination with a joystick type manipulator.


Specification:

Accessories included:
Ball Joint and Pipette Holder

Movement range/Fine:
X10mm, Y10mm, Z10mm, Full rotation of knob 250μm, Minimum graduation 1μm

Pneumatic Microinjector

Pneumatic Microinjector allows suction and injection of a microsample with high precision and operability comparable to oil hydraulic injectors. Equipped with a coarse-fine coaxial control knob, the microinjector enables both coarse and fine movement operation.


Specification:

Accessories included:
Injection Holder, Cleaning Rod, Tubing, Iron Plate, O-ring , Silicone Grease, Silicone Rubber Gasket , Hex Wrench, Fine Control Knob Cap

Movement range:
Plunger 40mm

Dimensions/Weight:
W167 ~ 214 × D55 × H78mm, 680g
Tube length: 1.2m

*Complies with Class.1 MDD 93/42/EEC

Video